Electrical Panel Upgrade in Palmdale & Lancaster, CA
A lot of Palmdale and Lancaster homes still run on the 100 amp panel they were built with in the 1970s or 1980s. That was plenty back then. It isn’t enough for central AC, an electric car, a hot tub and a kitchen full of appliances all running in July. Handyman Randy provides electrical panel upgrades for homes, rentals and small businesses throughout the Antelope Valley. We upgrade 100 amp panels to 200 amps, replace unsafe Federal Pacific and Zinsco panels, install subpanels for garages and additions, and coordinate the permit, inspection and Southern California Edison shutoff for you.
Our Panel Upgrade Services
Not every home that needs more power needs a new panel. Sometimes a subpanel or a load management device does the job for less. Other times, the panel itself is the problem, and upgrading is the only safe fix. Handyman Randy runs a load calculation on your home first, explains your options in plain English, and gives you a written price for the full job before any work begins.
Fair, transparent pricing with free written estimates before any work begins.
What's Included
100 amp to 200 amp panel upgrades
Main panel replacement
Federal Pacific and Zinsco panel replacement
Subpanel installation for garages, shops and additions
Panel upgrades for EV chargers, AC and solar
Load calculations before every upgrade
Breaker replacement and panel repair
Permits and city inspection
Coordination with Southern California Edison
Panel upgrades for rentals and small businesses
Free written estimates before any work begins
Most estimates provided within 24 hours
Fully licensed and insured
Backed by a 1 year workmanship guarantee
Serving Palmdale, Lancaster and the Antelope Valley
What Your Neighbors Are Saying About Us
Homeowners call us when breakers trip every time the AC kicks on, when they’re adding an EV charger, or when a home inspector flags their old panel. We explain what your panel can handle, give you honest options and handle every step from permit to final inspection.
“We had a huge electricity mess in our house. We hired Randy to install a sub panel for our house and he was amazing. Communication was spot on, he worked so fast and our electricity problem was gone quickly. He was able to take care of a bunch of other little problems we had around the house as well. His number has been on speed dial on our phones, to get our house perfect! Our house wouldn’t be running without Randy!”
“Randy helped me with some exterior siding repairs and advised me on an electrical panel improvement. He was very easy to work with and fast too. Great Handyman!”
“On time, efficient, and knowledgeable. Have not found anything he can not do. After watching him paint my neighbors entire house, and do an extensive electrical project; we asked him to come over to our house. Had him do several jobs, and have been happy every time.”
“Randy is great for your sprinkler, electrical and interior/exterior painting projects. He has performed all at my home. Randy is very professional when it comes to his work. He plans everything out with you before any work is done to make sure your vision comes to life. Randy is very meticulous and strives to do the best job for your projects. Randy also has the best communication throughout your project. I will always use Randy for any future projects at my home and refer him to all my friends and co-workers.”
“Randy and Caesar did a great job on repairing our roof, the internal portion of the house that needed repair, and also fixed the electrical in our dining room. Great job, great price, quality work. Thank you!”
“My family and I are really please with his work he came and fix our electrical I would used his service again”
200 Amp Panel Upgrade
A 200 amp panel gives your home room for central AC, an EV charger, an electric range and whatever you add in the next 20 years. Handyman Randy upgrades panels from 100 amps to 200 amps across Palmdale and Lancaster.
Signs You Need an Upgrade
Breakers trip often: Breakers that trip when the AC, dryer or microwave runs.
Lights dim when big appliances start: Lights that flicker or dim when the AC, swamp cooler or well pump kicks on.
No room for new circuits: A panel with every slot full, or breakers doubled up to make room.
Adding something big: An EV charger, central AC, heat pump, hot tub, solar or a room addition.
How We Upgrade It
We start with a load calculation to confirm the size your home needs. Then we pull the permit and schedule the shutoff with Southern California Edison. On install day, SCE disconnects power at the meter, we remove the old panel, install the new 200 amp panel and meter base, move every circuit over and label each breaker. After the city inspection passes, SCE reconnects your power.
Materials We Use
We install panels from major brands like Square D, Eaton and Siemens, with new breakers throughout. Many Antelope Valley homes have an outdoor combination meter and main panel, and we replace those with weather rated units built to handle desert sun and wind.
Panel Upgrades for Homeowners, Landlords and Businesses
We upgrade panels for homeowners, for landlords bringing older rentals up to date and for small businesses that have outgrown their service.
Turnaround
Power is usually off for most of one day while the panel is replaced. Scheduling the permit and SCE shutoff typically takes a few weeks from your estimate to install day.
Ready to Upgrade Your Panel?
Schedule a free, written estimate with Handyman Randy today.
Federal Pacific and Zinsco Panel Replacement
Federal Pacific Stab-Lok and Zinsco panels were installed in many homes built in the 1960s and 1970s. Both have a long history of breakers that can fail to trip during an overload, which is how electrical fires start. Many insurance companies won’t cover homes that still have them. Handyman Randy replaces these panels across Palmdale and Lancaster.
Why Homeowners Replace Them
Breakers that may not trip: Breakers that can stay on during an overload instead of shutting off.
Insurance problems: Insurers that raise rates, deny coverage or require replacement.
Home sales: Buyers and inspectors flag these panels, and many lenders want them replaced before closing.
Hard to find parts: Replacement breakers for these panels are scarce and often secondhand.
Subpanel Installation
A subpanel adds circuits in a garage, workshop, addition or detached building without replacing your main panel. Handyman Randy installs subpanels across Palmdale, Lancaster and the Antelope Valley.
Where We Install Subpanels
Garages and workshops: Power for tools, welders, freezers and garage AC units.
Detached buildings: Sheds, casitas, barns and ADUs on larger Antelope Valley lots.
Room additions: New circuits for added bedrooms, bathrooms or family rooms.
Full main panels: Extra space when the main panel is out of slots but has capacity left.
The Installation Process
Check capacity: We confirm your main panel can supply the subpanel without being overloaded.
Run the feeder: A properly sized feeder is run from the main panel, through the attic, along the wall or underground.
Install and connect: The subpanel is mounted, wired, labeled and tested.
Panel Upgrades for EV Chargers, Solar and New AC
Most panel upgrades in the Antelope Valley start with something new coming into the home. Handyman Randy plans the upgrade around what you’re adding.
How We Plan It
1. Look at What You’re Adding
We find out what you’re adding now and what you might add later, like a second EV or solar.
2. Run the Load Calculation
We add up your home’s current and future electrical load to size the panel correctly.
3. Check for a Cheaper Option
If a smaller charger setting, a load management device or a subpanel will work, we tell you before recommending a full upgrade.
4. Size for the Future
When an upgrade makes sense, we size it so you won’t need another one when you add solar or a second car.
Ready to Upgrade Your Panel?
Schedule a free, written estimate with Handyman Randy today.
Permits, Inspection and SCE
Every panel upgrade needs a permit and inspection, and most need Southern California Edison to shut off and reconnect your power. Handyman Randy handles all of it.
Our 3-Step Coordination
1. Pull the Permit: We file the electrical permit with the City of Palmdale, City of Lancaster or LA County, depending on where you live.
2. Schedule SCE: We coordinate the disconnect and reconnect with SCE so you know exactly when your power will be off.
3. Pass Inspection: We meet the inspector, make any corrections and get final approval before SCE turns your power back on.
Clean Job Site and Final Walkthrough
Panel work happens on the outside of your home, in the garage and sometimes in the attic. We treat your property with care and leave it cleaner than we found it.
Site Protection
Work area protection: Drop cloths go down around the panel, and plants and walkways nearby are covered.
Attic and wall care: Insulation is put back and wall openings are patched.
Cleanup
Haul-away: The old panel, breakers, wire scraps and packaging are removed from your property.
Final cleanup: The area around the panel is swept clean.
Final Quality Walkthrough
Before we pack up, Handyman Randy walks the job with you to confirm:
1. Power is restored and every circuit works.
2. Every breaker is clearly labeled.
3. The permit is signed off and the work area is clean.
4. You are 100% satisfied under our 1-Year Workmanship Guarantee.
Our 6-Step Panel Upgrade Process
To make sure every panel upgrade is safe, permitted and sized for your home’s future, Handyman Randy follows the same process on every job in Palmdale, Lancaster and the Antelope Valley.
Load Calculation & Free Estimate
We check your current panel, add up your home’s electrical load and give you a written price.
Permit & SCE Scheduling
We pull the permit and schedule the power shutoff with Southern California Edison.
Power Off & Remove
SCE disconnects power, and the old panel and breakers are removed.
Install the New Panel
The new panel is installed, every circuit is moved over and every breaker is labeled.
Inspect & Reconnect
The city inspects the work, and SCE reconnects your power.
Clean Up & Walkthrough
We test every circuit, clean up and walk you through your new panel.
Why Should You Choose Handyman Randy
Choosing who upgrades your panel comes down to safety, honest advice and handling every step for you. Handyman Randy knows the older 100 amp panels, Federal Pacific and Zinsco panels, and outdoor meter combos found across Palmdale and Lancaster. Our goal is to give your home the power it needs, safely and at a fair price, without selling you more than you need. Every upgrade is handled by a fully licensed and insured professional who pulls the permit and works with SCE from start to finish.
Local experience in Palmdale and Lancaster, California
Fully licensed and insured
200 amp upgrades, panel replacements and subpanels
Load calculations before every recommendation
Clear communication and honest, upfront pricing
Permits, inspection and SCE coordination handled for you
True pride in workmanship backed by a 1-year guarantee
Areas We Serve
Handyman Randy proudly serves Palmdale, Lancaster and the greater Antelope Valley with electrical panel upgrades, Federal Pacific and Zinsco replacements and subpanel installation. Whether you’re adding an EV charger in Quartz Hill or replacing an old panel in Lancaster, we upgrade your power safely.
Lancaster, CA
Quartz Hill, California 93536
Lincoln Crest, CA 93551
Sun Village, CA
Del Sur, California 93536, USA
Littlerock, California 93543, USA
Vincent, California 93550, USA
Acton, California, USA
Agua Dulce, California 91390, USA
Lake Los Angeles, California, USA
Redman, California 93535, USA
Frequently Asked Questions
How do I know if I need a panel upgrade?
Frequent tripped breakers, dimming lights when big appliances start, a full panel or plans to add an EV charger, AC or solar are the most common signs. We run a load calculation to know for sure.
How long will my power be off?
Usually most of one day while the panel is replaced and inspected.
Do I need to replace a Federal Pacific or Zinsco panel?
These panels have a history of breakers that may not trip during an overload. Many insurers and buyers require replacement. We recommend it.
Can I add an EV charger without upgrading my panel?
Sometimes. A lower charger setting or a load management device can avoid an upgrade. We check before recommending one.
Do you handle the permit and SCE?
Yes. We pull the permit, schedule the SCE shutoff and reconnect, and meet the inspector.
Do you offer a free estimate?
Yes. Every job starts with a free written estimate, and most estimates are provided within 24 hours.
Have questions?
Get in touch with us today.
Expert Interior and Exterior Painting Solutions.
📍 Palmdale, CA 93551
📞 +1 661-231-3999
🕒 Mon - Sat: 8 AM to 6 PM, Sun: Closed
© 2026. All rights reserved.