EV Charger Installation in Palmdale & Lancaster, CA
Most Antelope Valley commutes are long. Palmdale to Burbank, Lancaster to Santa Clarita, or out to Edwards and Plant 42 every day. Charging that car on a regular wall outlet adds only a few miles of range an hour, which isn’t enough. Handyman Randy provides EV charger installation for homes, rentals and businesses throughout Palmdale, Lancaster and the greater Antelope Valley. We install Level 2 chargers, Tesla Wall Connectors and NEMA 14-50 outlets in garages, carports and driveways, with the dedicated circuit, permit and inspection the job requires.
Our EV Charger Installation Services
Installing an EV charger isn’t just mounting a box on the wall. The charger needs its own 240 volt circuit, wire sized for the load and a panel that can handle it. Handyman Randy checks your electrical panel first, tells you plainly whether it has room for a charger, and gives you a written price for the full install before any work begins.
Fair, transparent pricing with free written estimates before any work begins.
What's Included
Level 2 home EV charger installation
Tesla Wall Connector installation
NEMA 14-50 outlet installation for plug-in chargers
Dedicated 240 volt circuit for your charger
Electrical panel capacity check before every install
Load management options for panels with limited room
Garage, carport and outdoor charger installation
Detached garage and long distance wire runs
Permits and city inspection
EV chargers for rentals and small businesses
Free written estimates before any work begins
Most estimates provided within 24 hours
Fully licensed and insured
Backed by a 1 year workmanship guarantee
Serving Palmdale, Lancaster and the Antelope Valley
What Your Neighbors Are Saying About Us
Homeowners call us when they bring home a new EV and realize the wall outlet won’t keep up. Landlords and businesses call us to add charging for tenants and employees. We explain what your panel can handle, give you a clear price and leave your garage clean.
“We had a huge electricity mess in our house. We hired Randy to install a sub panel for our house and he was amazing. Communication was spot on, he worked so fast and our electricity problem was gone quickly. He was able to take care of a bunch of other little problems we had around the house as well. His number has been on speed dial on our phones, to get our house perfect! Our house wouldn’t be running without Randy!”
“Great service, on time annd also well experience. Communicates well and it’s very honest with his work. Got two exterior outlets installed. If I need some other work done around the house I’ll for sure give Randy a call!”
“Randy helped me with some exterior siding repairs and advised me on an electrical panel improvement. He was very easy to work with and fast too. Great Handyman!”
“On time, efficient, and knowledgeable. Have not found anything he can not do. After watching him paint my neighbors entire house, and do an extensive electrical project; we asked him to come over to our house. Had him do several jobs, and have been happy every time.”
“Randy is a true professional, shows up in time and gets the job done clean and fast. I’ve used him several times for electrical work, plumbing and even masonry work. The man has many talents, no job he can’t tackle. I recommend Randy 100%”
“My family and I are really please with his work he came and fix our electrical I would used his service again”
Level 2 EV Charger Installation
A Level 2 charger can fully charge most electric cars overnight, compared to a few miles of range per hour on a regular outlet. Handyman Randy installs Level 2 home EV chargers across Palmdale and Lancaster.
What We Install
Hardwired chargers: Chargers wired directly to their own circuit, the most reliable setup and required for higher amp chargers.
Plug-in chargers: Chargers that plug into a NEMA 14-50 outlet, easy to unplug and take with you if you move.
Brand chargers: Tesla Wall Connector, ChargePoint Home Flex and other Level 2 chargers you’ve purchased.
Dual car setups: Two chargers or a shared charger setup for homes with more than one EV.
How We Install It
We start by checking your electrical panel to see how much power it can safely give a charger. Then we run a dedicated 240 volt circuit from the panel to the charger location, using wire sized for the charger’s amperage. The charger is mounted, connected, set to the right amperage and tested with your car plugged in.
Materials We Use
We use copper wire sized to code for your charger, proper conduit for exposed runs and a breaker matched to the circuit. Outdoor installs get weather rated boxes and fittings made to handle desert sun and wind.
EV Chargers for Homeowners, Landlords and Businesses
We install chargers for homeowners, for landlords adding charging to rentals and for small businesses that want charging for employees or customers.
Turnaround
Most garage installs near the panel are finished in one day. Long wire runs, detached garages and installs that need panel work take longer, and permit and inspection timing depends on the city.
Ready to Charge at Home?
Schedule a free, written estimate with Handyman Randy today.
Tesla Wall Connector Installation
The Tesla Wall Connector is the most common home charger we see in the Antelope Valley. Handyman Randy installs Tesla Wall Connectors in Palmdale and Lancaster homes.
What We Clear
New Wall Connector installs: Mounted, wired to a dedicated circuit and set to the amperage your panel can support.
Wi-Fi and app setup: The Wall Connector is connected to your Wi-Fi and checked in the Tesla app.
Power sharing: Two Wall Connectors set up to share one circuit for homes with two Teslas.
Moving an existing charger: Wall Connectors moved to a new spot in the garage or to a new home.
NEMA 14-50 Outlet Installation
A NEMA 14-50 outlet is the same type used for RVs and electric ranges, and it works with most plug-in EV chargers. Handyman Randy installs 14-50 outlets in garages and driveways across Palmdale and Lancaster.
Why Homeowners Choose a 14-50 Outlet
Works with most chargers: Most plug-in Level 2 chargers and mobile chargers use a 14-50 plug.
Easy to take with you: You can unplug the charger and take it to your next home.
RV ready: The same outlet can power a travel trailer or RV parked at home.
Lower upfront cost: Often less expensive than a hardwired install when you already own a plug-in charger.
The Installation Process
Check the panel: We confirm your panel can supply a 50 amp circuit.
Run the circuit: A dedicated circuit is run from the panel to the outlet location.
Install and test: A heavy duty, EV rated outlet is installed and tested under load.
Panel Capacity and Load Management
Many older homes in Palmdale and Lancaster have 100 amp panels that are already close to full. That doesn’t always mean you need a new panel. Handyman Randy checks your panel and gives you honest options.
How We Figure It Out
1. Run a Load Calculation
We add up the power your home uses, including AC, swamp coolers, dryers and ranges, to see what’s left for a charger.
2. Size the Charger to Fit
Many chargers can be set to a lower amperage that fits your panel and still charges your car overnight.
3. Consider Load Management
A load management device can pause charging when your home is using a lot of power, often avoiding a panel upgrade.
4. Recommend a Panel Upgrade Only if Needed
If your panel truly can’t support a charger, we’ll explain why and quote the upgrade.
Ready to Charge at Home?
Schedule a free, written estimate with Handyman Randy today.
Outdoor and Detached Garage Chargers
Not every home in the Antelope Valley has an attached garage next to the panel. Handyman Randy installs chargers on outside walls, carports and detached garages.
Level 1 vs Level 2 Charging
Level 1: Uses a regular 120 volt wall outlet and adds only a few miles of range per hour. Fine for short commutes, but slow for most Antelope Valley drivers.
Level 2: Uses a 240 volt circuit and can fully charge most EVs overnight. This is what most EV owners install at home.
Our 3-Step Outdoor Install Process
1. Plan the Route: We find the safest, shortest path for the wire, through the attic, along the wall or underground.
2. Run Protected Wire: Wire is run in conduit, and underground runs to detached garages are trenched to the depth code requires.
3. Mount and Weatherproof: The charger is mounted out of the worst sun when possible and sealed against wind blown dust and rain.
Clean Job Site and Final Walkthrough
EV charger installs happen in your garage, attic and walls. We treat your home with care and leave it cleaner than we found it.
Site Protection
Floor and car protection: Drop cloths go down in the garage, and we work around your vehicles.
Attic and wall care: Insulation is put back and any wall openings are patched.
Cleanup
Haul-away: Wire scraps, packaging and boxes are removed from your home.
Final cleanup: The garage and work area are swept clean.
Final Quality Walkthrough
Before we pack up, Handyman Randy walks the job with you to confirm:
1.The charger powers on and charges your car.
2. The amperage is set correctly for your circuit.
3. Wires are protected and the work area is clean.
4. You are 100% satisfied under our 1-Year Workmanship Guarantee.
Our 6-Step EV Charger Installation Process
To make sure every charger is safe, up to code and charging your car the night it’s installed, Handyman Randy follows the same process on every install in Palmdale, Lancaster and the Antelope Valley.
Panel Check & Free Estimate
We look at your panel, garage and parking spot and give you a written price for the full install.
Permit
We pull the electrical permit before any wiring begins.
Run the Circuit
A dedicated 240 volt circuit is run from the panel to the charger location in protected wire.
Mount & Connect
The charger or outlet is mounted, connected and set to the right amperage.
Test & Inspect
The charger is tested with your car, and the city inspection is scheduled and passed.
Clean Up & Walkthrough
We clean the garage, haul away scraps and show you how to use your charger.
Why Should You Choose Handyman Randy
Choosing who installs your EV charger comes down to safety, honest advice about your panel and an install that passes inspection. Handyman Randy knows the older panels, long commutes and detached garages common in Palmdale and Lancaster. Our goal is to get you charging at home quickly, at a fair price, without selling you a panel upgrade you don’t need. Every install is handled by a fully licensed and insured professional who pulls the permit and follows through from the first estimate to the final inspection.
Local experience in Palmdale and Lancaster, California
Fully licensed and insured
Level 2 chargers, Tesla Wall Connectors and 14-50 outlets
Panel checks and load management before any upgrade
Clear communication and honest, upfront pricing
Permits and inspections handled for you
True pride in workmanship backed by a 1-year guarantee
Areas We Serve
Handyman Randy proudly serves Palmdale, Lancaster and the greater Antelope Valley with EV charger installation, Tesla Wall Connector installation and NEMA 14-50 outlets. Whether you charge in an attached garage in Quartz Hill or a detached carport in Lake Los Angeles, we get you charging at home.
Lancaster, CA
Quartz Hill, California 93536
Lincoln Crest, CA 93551
Sun Village, CA
Del Sur, California 93536, USA
Littlerock, California 93543, USA
Vincent, California 93550, USA
Acton, California, USA
Agua Dulce, California 91390, USA
Lake Los Angeles, California, USA
Redman, California 93535, USA
Frequently Asked Questions
Do I need a panel upgrade to install an EV charger?
Not always. Many chargers can be set to fit the room in your panel, and load management devices can help avoid an upgrade. We check your panel before recommending anything.
Should I get a hardwired charger or a 14-50 outlet?
Hardwired chargers are more reliable and support higher charging speeds. A 14-50 outlet lets you unplug the charger and take it with you. We’ll help you choose.
Do you install Tesla Wall Connectors?
Yes. We install, set up and test Tesla Wall Connectors, including power sharing for two cars.
Do I need a permit for an EV charger?
Yes. EV charger installs require an electrical permit and inspection. We handle both.
Can you install a charger in a detached garage?
Yes. We run protected wire through the attic, along the wall or underground to reach detached garages and carports.
Do you offer a free estimate?
Yes. Every job starts with a free written estimate, and most estimates are provided within 24 hours.
Have questions?
Get in touch with us today.
Expert Interior and Exterior Painting Solutions.
📍 Palmdale, CA 93551
📞 +1 661-231-3999
🕒 Mon - Sat: 8 AM to 6 PM, Sun: Closed
© 2026. All rights reserved.